Résultat de votre recherche

ZIPP 30 COURSE TUBULAR DISC-BRAKE FRONT WHEEL
ZIPP 30 COURSE TUBULAR DISC-BRAKE FRONT WHEEL

Zipp’s carbon-rimmed disc brake wheels have been crushing it at the elite level. Not only has Jeremy Powers taken them to the top of the domestic heap, but the Cannondale cyclocross team has been using them to nip at Powers’ heels and leave the rest of the cyclocross competition behind. The Zipp 30 Corse Tubular Disc-Brake Wheel is their first aluminum-rimmed disc-brake tubular, and it is for anyone who wants sew-ups but isn’t ready for the cost of carbon. This wheel works on road bikes, adventure bikes, cyclocross bikes, and even 29ers. Anywhere you have disc brakes and want a strong, light, aero, reliable, aluminum tubular rim to hold up and shape your tires. The rim possesses a bead shape that makes the wheel tubeless-ready. The shape, with a 25mm exterior width and 26mm depth takes its shape cues from Zipp’s 202 Firecrest Carbon Clincher. The depth is paired with the width for increased air volume inside the tire, which means you can run lower pressure for greater comfort and still net out lower rolling resistance. When the rim cuts through the wind, it does so with very little effort, and the depth has little effect on crosswind stability. The hub set found here, called 77/177D, are already found on Zipp 202 and 303 Firecrest disc-brake wheels. The hubs are designed to be versatile. They have six-bolt mounting for rotors. They come with a disc-brake specific quick release, but the skewer and the hub end caps can easily be pulled by hand and swapped for thru-axle endcaps. Thus you can run either 12x100mm or 15x100mm in front and either 12x135mm or 12x142mm in the back. The axle itself has a 17mm diameter. Because of these needs, Zipp eliminated bearing pre-load and also improved the bearing shielding. These hubs take less work to maintain and roll just fine after your epic muddy cx race. All the same, the spokes are Sapim’s CX-Ray, which are the most aero spokes around, and will save you time every second of the ride. The wheels are sold separately. Each wheels comes with quick release hub end caps, thru-axle hub end caps, and Zipp skewer. When you buy the rear wheel version, it comes with either a Campagnolo-compatible 9/10/11-speed cassette body or a Shimano/SRAM-compatible cassette body with a 1.85mm spacer to run nine- or ten-speed cassettes. These can be swapped without re-dishing the wheel, and both can be pulled in favor of a SRAM XD driver body for even wider range of gearing. The 30 Course Tubular Disc-Brake is Zipp’s do-it-all tubular wheelset....

Bicycle Wheel Frame Zipp 

213 EUR

Nairobi
Kenya

02/08/2021
Nouveau

ZIPP 30 COURSE CLINCHER DISC-BRAKE FRONT WHEEL
ZIPP 30 COURSE CLINCHER DISC-BRAKE FRONT WHEEL

Zipp has been building disc-brake-specific wheels for years. Some of the earliest versions were built for the Cannondale cyclocross team and Jeremy Powers. These elite test mules helped identify strengths and weaknesses of initial designs and rode the way for the Zipp 30 Course Disc-Brake clincher. This wheel works on road bikes, adventure bikes, cyclocross bikes, and even 29ers. Anywhere you have disc brakes and want a strong, light, aero, reliable, aluminum rim to hold up and shape your tires. The rim possesses a bead shape that makes the wheel tubeless-ready. The shape, with a 25mm exterior width, 21mm internal width and 26mm depth takes its shape cues from Zipp’s 202 Firecrest Carbon Clincher. The depth is paired with the width for increased air volume inside the tire, which means you can run lower pressure for greater comfort and still net out lower rolling resistance. When the rim cuts through the wind, it does so with very little effort, and the depth has little effect on crosswind stability. The hub set found here, called 77/177D, are already found on Zipp 202 and 303 Firecrest disc-brake wheels. The hubs are designed to be versatile. They feature six-bolt mounting for rotors. They come with a disc-brake specific quick release, but the skewer and the hub end caps can easily be pulled by hand and swapped for thru-axle endcaps. Thus you can run either 12x100mm or 15x100mm in front and either 12x135mm or 12x142mm in the back. The axle itself has a 17mm diameter. Because of these needs, Zipp eliminated bearing pre-load and also improved the bearing shielding. These hubs take less work to maintain and roll just fine after your epic muddy cx race. They’re laced with Sapim’s aero CX-Ray spokes for road speed. The wheels are sold separately. Each wheels comes with quick release hub end caps, thru-axle hub end caps, Zipp skewer, Zipp rim tape, and Zipp tubeless valve. When you buy the rear wheel version, it comes with either a Campagnolo-compatible 9/10/11-speed cassette body or a Shimano/SRAM-compatible cassette body with a 1.85mm spacer to run nine- or ten-speed cassettes. These can be swapped without re-dishing the wheel, and both can be pulled in favor of a SRAM XD driver body for even wider range of gearing. The 30 Course Clincher Disc-Brake is Zipp’s do-it-all clincher wheelset for the rotor crowd....

Bicycle Wheel Frame Zipp 

213 EUR

Nairobi
Kenya

02/08/2021
Nouveau

ZIPP 202 NSW DISC TUBELESS CLINCHER REAR WHEEL
ZIPP 202 NSW DISC TUBELESS CLINCHER REAR WHEEL

When you’re looking for an ultra-light, aero, climbing disc-brake wheel, the one you’ll turn to is the Zipp 202 NSW Disc Tubeless Clincher. This is shallow, wide rim, that is best for those times when gravitational resistance is highest, and still has the aero advantages that will increase your speed when gravitational resistance is lowest, and all other times as well. Zipp, when they decided to focus on building disc brake-specific wheels, looked at not only what they could do for the rim, but what they could do with the bikes the wheels go in. For the first part, they knew that without the need for a brake track, they could extend their dimpling all the way to the end of the rim, as they did. For the second, they realized that most road bikes with disc brakes come with enough clearance for 28mm tires, so they designed with those in mind. With the dimpling they molded their SawTooth pattern into the exterior walls. As you should know by now, SawTooth is a design of indents molded into the outside rim walls that is comprised of twelve nodes. These are designed to start working for you at speeds of 20mph and then work better when faster. They essentially change the behavior of the wind around the rim to minimize side wind pressure on the rim in crosswinds, thus making the wheel more stable at high speeds. They also tweaked the rim shape, keeping the 32mm depth the 202 is known for, but increasing the max width of the rim to 28.9mm. The result is that the tire width that is most aerodynamic is 28mm. You can go wider for rough- and off-road adventures, but probably won’t want to go narrower than 25mm. The interior of the rim has been changed as well. the internal width is 21mm, and the side walls have ridges that help hold the tire in place when pressure is low. This is to improve the interface with tubeless tire beads. No burps when running wide tires at low pressures. Factory-applied tubeless rim tape finishes the rim package. You can run these wheels with tubed tires; you’ll just need to remove the valve stem from the rim. Thanks to the need to make the rim sidewalls strong enough to handle the pressure of clincher tires, these carbon rims are super-strong. Stronger than aluminum rims, so worry not about their durability. They are race light, but training wheel tough. Sapim CX-Ray J-Bend spokes are used both front and rear to lace the rim to the hub. These spokes are light, aero, and stiff. 24 spokes, two-cross, both front and rear. These NSW wheels utilize Zipp’s Cognition hubs. The front features scalloped flanges for the spoke beds. J-bend spokes resist the twisting forces disc-braking can put on spokes. This results in less pressure on the spokes, increasing lateral stiffness and durability. The rear has a pawl design with an Axial Clutch, which reduces pawl drag by 50% when coasting, and with a 36-tooth engagement, you’re driving the wheel the moment you start pedaling. The disc-mounting method is Centerlock only. Lock ring not included. The hubs come with Zipp’s Tangente quick release skewers as well as hand-removable end caps to fit 100x12mm and 100x15mm thru-axles in front and 142x12mm rear thru-axles. The wheels weigh in at 1475g per set, 695g in front, 780g in back. The wheels, sold separately as front and rear, also come with a wheel bag, a Zipp tubeless valve factory-installed, valve core removal tool, Zipp Cognition Oil, and a freehub body spacer to take the 11-speed hub down to 10-speed if you need. The single wheel bags can be secured together if you have a pair. A SRAM/Shimano 11-speed cassette body is standard, though a SRAM XD-R driver can be swapped in. The Zipp 202 NSW Disc Tubeless Clincher is the climbing wheel that will help your disc brake bike soar like an eagle both going up and down the mountain....

Bicycle Wheel Frame Zipp 

864 EUR

Nairobi
Kenya

02/08/2021
Nouveau

ZIPP 202 NSW DISC TUBELESS CLINCHER FRONT WHEEL
ZIPP 202 NSW DISC TUBELESS CLINCHER FRONT WHEEL

When you’re looking for an ultra-light, aero, climbing disc-brake wheel, the one you’ll turn to is the Zipp 202 NSW Disc Tubeless Clincher. This is shallow, wide rim, that is best for those times when gravitational resistance is highest, and still has the aero advantages that will increase your speed when gravitational resistance is lowest, and all other times as well. Zipp, when they decided to focus on building disc brake-specific wheels, looked at not only what they could do for the rim, but what they could do with the bikes the wheels go in. For the first part, they knew that without the need for a brake track, they could extend their dimpling all the way to the end of the rim, as they did. For the second, they realized that most road bikes with disc brakes come with enough clearance for 28mm tires, so they designed with those in mind. With the dimpling they molded their SawTooth pattern into the exterior walls. As you should know by now, SawTooth is a design of indents molded into the outside rim walls that is comprised of twelve nodes. These are designed to start working for you at speeds of 20mph and then work better when faster. They essentially change the behavior of the wind around the rim to minimize side wind pressure on the rim in crosswinds, thus making the wheel more stable at high speeds. They also tweaked the rim shape, keeping the 32mm depth the 202 is known for, but increasing the max width of the rim to 28.9mm. The result is that the tire width that is most aerodynamic is 28mm. You can go wider for rough- and off-road adventures, but probably won’t want to go narrower than 25mm. The interior of the rim has been changed as well. the internal width is 21mm, and the side walls have ridges that help hold the tire in place when pressure is low. This is to improve the interface with tubeless tire beads. No burps when running wide tires at low pressures. Factory-applied tubeless rim tape finishes the rim package. You can run these wheels with tubed tires; you’ll just need to remove the valve stem from the rim. Thanks to the need to make the rim sidewalls strong enough to handle the pressure of clincher tires, these carbon rims are super-strong. Stronger than aluminum rims, so worry not about their durability. They are race light, but training wheel tough. Sapim CX-Ray J-Bend spokes are used both front and rear to lace the rim to the hub. These spokes are light, aero, and stiff. 24 spokes, two-cross, both front and rear. These NSW wheels utilize Zipp’s Cognition hubs. The front features scalloped flanges for the spoke beds. J-bend spokes resist the twisting forces disc-braking can put on spokes. This results in less pressure on the spokes, increasing lateral stiffness and durability. The rear has a pawl design with an Axial Clutch, which reduces pawl drag by 50% when coasting, and with a 36-tooth engagement, you’re driving the wheel the moment you start pedaling. The disc-mounting method is Centerlock only. Lock ring not included. The hubs come with Zipp’s Tangente quick release skewers as well as hand-removable end caps to fit 100x12mm and 100x15mm thru-axles in front and 142x12mm rear thru-axles. The wheels weigh in at 1475g per set, 695g in front, 780g in back. The wheels, sold separately as front and rear, also come with a wheel bag, a Zipp tubeless valve factory-installed, valve core removal tool, Zipp Cognition Oil, and a freehub body spacer to take the 11-speed hub down to 10-speed if you need. The single wheel bags can be secured together if you have a pair. A SRAM/Shimano 11-speed cassette body is standard, though a SRAM XD-R driver can be swapped in. The Zipp 202 NSW Disc Tubeless Clincher is the climbing wheel that will help your disc brake bike soar like an eagle both going up and down the mountain....

Bicycle Wheel Frame Zipp 

672 EUR

Nairobi
Kenya

02/08/2021
Nouveau