RICOH GEN4 / 7PL PRINTHEAD (INDOELECTRONIC)

  • Share on social media

The Ricoh GEN4 greyscale printhead is suitable for a range of water, solvent and UV printers. This printhead has an integrated heater and thermistor. This is Ricoh original printhead and it is covered by a manufacturer warranty. This Ricoh GEN4 is available in two different cable lengths: 19cm long and 44cm long and a choice of hose barb ink inlet or o-ring sealed ink inlet. Ricoh partnumber N220792W, N220792N, N220792S or N220792E are all Ricoh GEN4 7PL printheads with long cable and hose barbs.

Price : USD 484.00
Min Order : 1 Pcs
Lead Time : 6 – 7 Days
Port : CIF / Kualanamu International Airport
Terms : T / T, Western Union, Paypal, Money Gram
Shipment : FedEx, DHL, UPS
Product : Ori and Ready in stock
Address : Jl.S.Parman No.21/272
City/Zip Code : Medan, 20151
Province : Sumatera Utara
Country : INDONESIA

order@indoelectronic.com

Visit our site to see more cataloq and discount price : https://indoelectronic.com
DHL/Fedex : 100% satisfied with the creativity of the box design
Kualanamu International Airport

Town / City / village:Lagos - Nigeria
Creation Date08.06.2021
Ad number:14999
Category
Keywords:Printheads, printer

Send a message to user

INDOELECTRONIC

 Our recommendations and advices
In general we believe that all our announcer and services providers are genuine. But In order to avoid been fooled and for your own personal safety, always meet the seller in a public places or at least not in isolated places. It's probably a good idea if you bring a friend as well to witness the transaction

Other Ads from this advertiser More similar ads

Other Ads that may also interest you More similar ads

 Roland CAMM-1 GX-400
Roland CAMM-1 GX-400

MODEL GX-300 GX-400 GX-500 GX-640 Cutting method Media-movement method Driving method Digital control servo motor Friction feed/Digital control servo motor Maximum cutting area 29 x 984-1/8″ (737 x 24,998mm) 39 x 984-1/8″ (1000 x 24,998mm) 47 x 984-1/8″ (1195 x 24,998mm) Width: 65″ (1651 mm) Acceptable media width 2 to 36″ (50 to 915mm) 3-1/2 to 46″ (90 to 1178mm) 3-1/2 to 54″ (90 to 1372mm) 5-1/16″ to 72.5″ (130 mm to 1842 mm) Maximum cutting speed During cutting: 33ips (850mm/sec.) [in all directions] During tool-up: 47 ips (1202mm/sec) [in 45º direction] During cutting: 33.5″/sec (850 mm/sec) (in all directions) During tool-up: 47″/sec (1202 mm/sec) Cutting force 20 to 350 gf 1 to 85 cm/sec (in increments of 1 cm/sec), 20 to 350 grams force (increments of 10 grams) > Mechanical resolution 0.00049″/step (0.0125mm/step) 0.000137″/step (0.0035 mm/step) Software resolution 0.00098″/step (0.025mm/step) 0.000984″/step (0.025 mm/step) Distance accuracy Error of less than ± 0.2% of distance traveled, or 0.00039 (0.1mm), whichever is greater Error of less than 0.2% of distance traveled, or 0.00394″ (0.1 mm), which is greater Repetition accuracy 0.1mm or less (excluding stretching/contraction of the material) Range for assured repetition accuracy For materials with a width exceeding 24″ (610mm): Length 157-7/16″ (4000mm) (GX-400/500 only) For materials with a width of 24″ (610mm) or less: Length 314-15/16″ (8000mm) 0.004″ (0.1 mm) or less Interface Serial (RS-232C compatible), USB (Rev. 1.1) Serial (RS-232C-compatible), USB (Rev 1.1) Buffer size 8MB (2MB for re-plot buffer) 2 MB (buffer size: 8 MB) Power supply AC 100V to 240V +/- 10% 50/60Hz 1.2A AC 100V to 240V =/- 10% 50/60Hz 1.1A AC 100V to 240V ±10% 50/60Hz 1.2A Power consumption Approx. 95W Approx. 100WApprox. 100W Acoustic noise level Cutting mode: under 62 dB (A) Standby Mode: under 40 dB (A) (According to ISO 7779) Dimensions with stand 45-1/16(W) x 28-5/8(D) x 43-13/16″(H) 1144(W) x 727(D) x 1113mm (H) 55-3/8(W) x 28-5/8(D) x 43-13/16″(H) 1407(W) x 727(D) x 1113mm(H) 63-1/16(W) x 28-5/8(D) x 43-13/16(H) 1602(W) x 727(D) x 1113mm (H) 83-1/4 (W) x 28-5/8 (D) x 43-13/16 (H) in (2155 (W) x 727 (D) x 1113 (H) mm) Weight with stand 97lb. (44 kg) 112.4lb. (51 kg) 121.2 lb. (55 kg) 141.1 lb (64 kg) Operating temperature 41 to 104F (5 to 40C) Operating humidity 35 to 80% (non-condensing) Standard accessories Power cord, blade, blade holder, alignment tool, cable clamp, replacement blade for separating knife, Roland Software Package CD-ROM (CutStudio design software, plug-ins for CorelDraw 10/11/12 and Adobe Illustrator 9/10/CS), startup guide, user manual Power cord, blade holder (XD-CH2), pin, blade, blade (ZEC-U5022), alignment tool, cable clamp, replacement blade for sheet cutter, USB cable, Roland software CD-ROM, setup guide, user’s manual ...

printer machine canon 

1986 EUR

Namibe
Algeria

10.09.2021

Roland CAMM-1 GX-500
Roland CAMM-1 GX-500

MODEL GX-300 GX-400 GX-500 GX-640 Cutting method Media-movement method Driving method Digital control servo motor Friction feed/Digital control servo motor Maximum cutting area 29 x 984-1/8″ (737 x 24,998mm) 39 x 984-1/8″ (1000 x 24,998mm) 47 x 984-1/8″ (1195 x 24,998mm) Width: 65″ (1651 mm) Acceptable media width 2 to 36″ (50 to 915mm) 3-1/2 to 46″ (90 to 1178mm) 3-1/2 to 54″ (90 to 1372mm) 5-1/16″ to 72.5″ (130 mm to 1842 mm) Maximum cutting speed During cutting: 33ips (850mm/sec.) [in all directions] During tool-up: 47 ips (1202mm/sec) [in 45º direction] During cutting: 33.5″/sec (850 mm/sec) (in all directions) During tool-up: 47″/sec (1202 mm/sec) Cutting force 20 to 350 gf 1 to 85 cm/sec (in increments of 1 cm/sec), 20 to 350 grams force (increments of 10 grams) > Mechanical resolution 0.00049″/step (0.0125mm/step) 0.000137″/step (0.0035 mm/step) Software resolution 0.00098″/step (0.025mm/step) 0.000984″/step (0.025 mm/step) Distance accuracy Error of less than ± 0.2% of distance traveled, or 0.00039 (0.1mm), whichever is greater Error of less than 0.2% of distance traveled, or 0.00394″ (0.1 mm), which is greater Repetition accuracy 0.1mm or less (excluding stretching/contraction of the material) Range for assured repetition accuracy For materials with a width exceeding 24″ (610mm): Length 157-7/16″ (4000mm) (GX-400/500 only) For materials with a width of 24″ (610mm) or less: Length 314-15/16″ (8000mm) 0.004″ (0.1 mm) or less Interface Serial (RS-232C compatible), USB (Rev. 1.1) Serial (RS-232C-compatible), USB (Rev 1.1) Buffer size 8MB (2MB for re-plot buffer) 2 MB (buffer size: 8 MB) Power supply AC 100V to 240V +/- 10% 50/60Hz 1.2A AC 100V to 240V =/- 10% 50/60Hz 1.1A AC 100V to 240V ±10% 50/60Hz 1.2A Power consumption Approx. 95W Approx. 100WApprox. 100W Acoustic noise level Cutting mode: under 62 dB (A) Standby Mode: under 40 dB (A) (According to ISO 7779) Dimensions with stand 45-1/16(W) x 28-5/8(D) x 43-13/16″(H) 1144(W) x 727(D) x 1113mm (H) 55-3/8(W) x 28-5/8(D) x 43-13/16″(H) 1407(W) x 727(D) x 1113mm(H) 63-1/16(W) x 28-5/8(D) x 43-13/16(H) 1602(W) x 727(D) x 1113mm (H) 83-1/4 (W) x 28-5/8 (D) x 43-13/16 (H) in (2155 (W) x 727 (D) x 1113 (H) mm) Weight with stand 97lb. (44 kg) 112.4lb. (51 kg) 121.2 lb. (55 kg) 141.1 lb (64 kg) Operating temperature 41 to 104F (5 to 40C) Operating humidity 35 to 80% (non-condensing) Standard accessories Power cord, blade, blade holder, alignment tool, cable clamp, replacement blade for separating knife, Roland Software Package CD-ROM (CutStudio design software, plug-ins for CorelDraw 10/11/12 and Adobe Illustrator 9/10/CS), startup guide, user manual Power cord, blade holder (XD-CH2), pin, blade, blade (ZEC-U5022), alignment tool, cable clamp, replacement blade for sheet cutter, USB cable, Roland software CD-ROM, setup guide, user’s manual ...

printer machine canon 

2531 EUR

Namibe
Algeria

10.09.2021

Roland CAMM-1 GX-640
Roland CAMM-1 GX-640

MODEL GX-300 GX-400 GX-500 GX-640 Cutting method Media-movement method Driving method Digital control servo motor Friction feed/Digital control servo motor Maximum cutting area 29 x 984-1/8″ (737 x 24,998mm) 39 x 984-1/8″ (1000 x 24,998mm) 47 x 984-1/8″ (1195 x 24,998mm) Width: 65″ (1651 mm) Acceptable media width 2 to 36″ (50 to 915mm) 3-1/2 to 46″ (90 to 1178mm) 3-1/2 to 54″ (90 to 1372mm) 5-1/16″ to 72.5″ (130 mm to 1842 mm) Maximum cutting speed During cutting: 33ips (850mm/sec.) [in all directions] During tool-up: 47 ips (1202mm/sec) [in 45º direction] During cutting: 33.5″/sec (850 mm/sec) (in all directions) During tool-up: 47″/sec (1202 mm/sec) Cutting force 20 to 350 gf 1 to 85 cm/sec (in increments of 1 cm/sec), 20 to 350 grams force (increments of 10 grams) > Mechanical resolution 0.00049″/step (0.0125mm/step) 0.000137″/step (0.0035 mm/step) Software resolution 0.00098″/step (0.025mm/step) 0.000984″/step (0.025 mm/step) Distance accuracy Error of less than ± 0.2% of distance traveled, or 0.00039 (0.1mm), whichever is greater Error of less than 0.2% of distance traveled, or 0.00394″ (0.1 mm), which is greater Repetition accuracy 0.1mm or less (excluding stretching/contraction of the material) Range for assured repetition accuracy For materials with a width exceeding 24″ (610mm): Length 157-7/16″ (4000mm) (GX-400/500 only) For materials with a width of 24″ (610mm) or less: Length 314-15/16″ (8000mm) 0.004″ (0.1 mm) or less Interface Serial (RS-232C compatible), USB (Rev. 1.1) Serial (RS-232C-compatible), USB (Rev 1.1) Buffer size 8MB (2MB for re-plot buffer) 2 MB (buffer size: 8 MB) Power supply AC 100V to 240V +/- 10% 50/60Hz 1.2A AC 100V to 240V =/- 10% 50/60Hz 1.1A AC 100V to 240V ±10% 50/60Hz 1.2A Power consumption Approx. 95W Approx. 100WApprox. 100W Acoustic noise level Cutting mode: under 62 dB (A) Standby Mode: under 40 dB (A) (According to ISO 7779) Dimensions with stand 45-1/16(W) x 28-5/8(D) x 43-13/16″(H) 1144(W) x 727(D) x 1113mm (H) 55-3/8(W) x 28-5/8(D) x 43-13/16″(H) 1407(W) x 727(D) x 1113mm(H) 63-1/16(W) x 28-5/8(D) x 43-13/16(H) 1602(W) x 727(D) x 1113mm (H) 83-1/4 (W) x 28-5/8 (D) x 43-13/16 (H) in (2155 (W) x 727 (D) x 1113 (H) mm) Weight with stand 97lb. (44 kg) 112.4lb. (51 kg) 121.2 lb. (55 kg) 141.1 lb (64 kg) Operating temperature 41 to 104F (5 to 40C) Operating humidity 35 to 80% (non-condensing) Standard accessories Power cord, blade, blade holder, alignment tool, cable clamp, replacement blade for separating knife, Roland Software Package CD-ROM (CutStudio design software, plug-ins for CorelDraw 10/11/12 and Adobe Illustrator 9/10/CS), startup guide, user manual Power cord, blade holder (XD-CH2), pin, blade, blade (ZEC-U5022), alignment tool, cable clamp, replacement blade for sheet cutter, USB cable, Roland software CD-ROM, setup guide, user’s manual ...

printer machine canon 

3038 EUR

Namibe
Algeria

10.09.2021

Roland DWX-4W Wet Dental Mill
Roland DWX-4W Wet Dental Mill

MODEL GX-300 GX-400 GX-500 GX-640 Cutting method Media-movement method Driving method Digital control servo motor Friction feed/Digital control servo motor Maximum cutting area 29 x 984-1/8″ (737 x 24,998mm) 39 x 984-1/8″ (1000 x 24,998mm) 47 x 984-1/8″ (1195 x 24,998mm) Width: 65″ (1651 mm) Acceptable media width 2 to 36″ (50 to 915mm) 3-1/2 to 46″ (90 to 1178mm) 3-1/2 to 54″ (90 to 1372mm) 5-1/16″ to 72.5″ (130 mm to 1842 mm) Maximum cutting speed During cutting: 33ips (850mm/sec.) [in all directions] During tool-up: 47 ips (1202mm/sec) [in 45º direction] During cutting: 33.5″/sec (850 mm/sec) (in all directions) During tool-up: 47″/sec (1202 mm/sec) Cutting force 20 to 350 gf 1 to 85 cm/sec (in increments of 1 cm/sec), 20 to 350 grams force (increments of 10 grams) > Mechanical resolution 0.00049″/step (0.0125mm/step) 0.000137″/step (0.0035 mm/step) Software resolution 0.00098″/step (0.025mm/step) 0.000984″/step (0.025 mm/step) Distance accuracy Error of less than ± 0.2% of distance traveled, or 0.00039 (0.1mm), whichever is greater Error of less than 0.2% of distance traveled, or 0.00394″ (0.1 mm), which is greater Repetition accuracy 0.1mm or less (excluding stretching/contraction of the material) Range for assured repetition accuracy For materials with a width exceeding 24″ (610mm): Length 157-7/16″ (4000mm) (GX-400/500 only) For materials with a width of 24″ (610mm) or less: Length 314-15/16″ (8000mm) 0.004″ (0.1 mm) or less Interface Serial (RS-232C compatible), USB (Rev. 1.1) Serial (RS-232C-compatible), USB (Rev 1.1) Buffer size 8MB (2MB for re-plot buffer) 2 MB (buffer size: 8 MB) Power supply AC 100V to 240V +/- 10% 50/60Hz 1.2A AC 100V to 240V =/- 10% 50/60Hz 1.1A AC 100V to 240V ±10% 50/60Hz 1.2A Power consumption Approx. 95W Approx. 100WApprox. 100W Acoustic noise level Cutting mode: under 62 dB (A) Standby Mode: under 40 dB (A) (According to ISO 7779) Dimensions with stand 45-1/16(W) x 28-5/8(D) x 43-13/16″(H) 1144(W) x 727(D) x 1113mm (H) 55-3/8(W) x 28-5/8(D) x 43-13/16″(H) 1407(W) x 727(D) x 1113mm(H) 63-1/16(W) x 28-5/8(D) x 43-13/16(H) 1602(W) x 727(D) x 1113mm (H) 83-1/4 (W) x 28-5/8 (D) x 43-13/16 (H) in (2155 (W) x 727 (D) x 1113 (H) mm) Weight with stand 97lb. (44 kg) 112.4lb. (51 kg) 121.2 lb. (55 kg) 141.1 lb (64 kg) Operating temperature 41 to 104F (5 to 40C) Operating humidity 35 to 80% (non-condensing) Standard accessories Power cord, blade, blade holder, alignment tool, cable clamp, replacement blade for separating knife, Roland Software Package CD-ROM (CutStudio design software, plug-ins for CorelDraw 10/11/12 and Adobe Illustrator 9/10/CS), startup guide, user manual Power cord, blade holder (XD-CH2), pin, blade, blade (ZEC-U5022), alignment tool, cable clamp, replacement blade for sheet cutter, USB cable, Roland software CD-ROM, setup guide, user’s manual ...

printer machine canon 

10137 EUR

Namibe
Algeria

10.09.2021